CORROSION PROTECTION OF STEEL 1020 BY FILMS OF CONDUCTORS ELETRODEPOSITATED IN METHANOSULFONIC ACID

ALEX FERNANDES DE SOUZA; ANDREA SANTOS LIU; LIU YAO CHO

doi:10.30609/jeti.v1i1.5303

ALEX FERNANDES DE SOUZA Instituto Federal de Educação, Ciência e tecnologia de São Paulo – Campus São José dos Campos
ANDREA SANTOS LIU Instituto Federal de Educação, Ciência e tecnologia de São Paulo – Campus São José dos Campos
LIU YAO CHO Universidade do Vale do Paraíba – Faculdade de Engenharias, Arquitetura e Urbanismo – Instituto de Pesquisa e Desenvolvimento

DOI: https://doi.org/10.30609/jeti.v1i1.5303

Resumo

1020 steel is widely used in the industrial sector, however it is a reactive metal and susceptible to corrosion, being necessary to use surface coatings to corrosion protect the metal in corrosive means. The polyaniline and polypyrrole are conductive polymers that have the ability to inhibit corrosion when deposited electrode in organic media. In this work, corrosion protection was investigated through polyaniline and polypyrrole films electrodeposited in methanesulfonic acid medium. The films were electrodeposited by chronoamperometry and the corrosion tests were performed by potentiodynamic polarization in aggressive sodium chloride medium. The surface of the films was analyzed by scanning electron microscopy. From the polarization it was observed that the polypyrrole film, in relation to the polyaniline film, showed better performance against corrosion. The MEV indicated that the polypyrrole film is homogeneous and adherent, while the polyaniline film showed flaws, allowing the interaction of the metal with the corrosive medium

Referências

RYU, H,; SHENG, N.; OHTSUKA, T,; FUJITA, S,; KAJIYAMA, H. Polypyrrole film on 55% Al–Zn-coated steel for corrosion prevention. Corrosion science 56, p. 67-77, 2012.

MERCAN, S.; AYDIN, S. ÖSDEMIR, N. Effect of welding parameters on the fatigue properties of dissimilar AISI 22-05-AISI 1020 joined friction welding. International Journal of Fatigue 81, p. 78-90. 2015.

SIMESCU, F.; IDRISSI, H. Effect of zinc phosphate chemical conversion coating on corrosion behaviour of mild steel in alkaline medium: protection of rebars in reinforced concrete. Sci Technol Adv Mater 9:4. 2008.

MONTOYA, P.; MARTINS, C. R.; MELO, H. G.; AOKI, I. V.; JARAMILLO, F.; CALDERÓN, J. A. Synthesis of polypyrrole-magnetite/silane coatings on steel and assessment of anticorrosive properties. Electrochimica Acta 124, n. 1, p. 100-108. 2014.

RAJAGOPALAN, R.; IROH, J. O. Characterization of polyaniline–polypyrrole composite coatings on low carbon steel: a XPS and infrared spectroscopy study. Applied Surface Science. 218:1–4, p. 58-69. 2003.

ERMELIN, E.; PETITJEAN, J.; AEIYACH, S.; LACROIX, J. C; LACAZE, P. C. Industrial polypyrrole electrodeposition on zincelectroplated steel. Journal of Applied Eletrochemistry 31, p. 905-911. 2001.

EL JAOUHARI, A.; LAABD, M.; BAZZAOUI, E. A.; ALBOURINE, A. MARTINS, J. I.; WANG, R.; NAGY, G.; Electrochemical and spectroscopical studies of polypyrrole synthesized on carbon steel from aqueous medium. Synthetic Metals 209, p.11-18. 2015

HAMER, W. J.; KOENE L.; J. WIT, H. W. Formation and electrochemical behaviour of poly(pyrrole) coatings on steel substrates. Materials and Corrosion 55(9). 2004.

SOUZA, A. F.; REIS, J. L.; CHO, L. Y.; FERREIRA, B. R.; LIU, A. S. Proteção contra corrosão da metal de alumínio 2024–t3 por filme de polipirrol eletrodepositado em acido p-tolueno sulfônico. Revista Brasileira de Aplicação de Vácuo 36, n.1, p34-38, 2017.

VERA, R.; SCHREBLER, R.; GREZ, P.; ROMERO, H.; The corrosion-inhibiting effect of polypyrrole films doped with p-toluene-sulfonate, benzene-sulfonate or dodecyl-sulfate anions, as coating on stainless steel in NaCl aqueous solutions. Progress in Organic Coatings 77, n. 4, p. 853-858. 2014.

HERRASTI, P.; OCÓN, P. Polypyrrole layers for steel protection. Applied Surface Science 172(3–4), p. 276-284. 2003.